我々社はCisco　350-401資格取得講座試験に準備するあなたに怖さを取り除き、正確の方法と問題集を提供できます。ご購入の前後において、いつまでもあなたにヘルプを与えられます。あなたのCisco　350-401資格取得講座試験に合格するのは我々が与えるサプライズです。 また、RadiatoripermotoriのCiscoの350-401資格取得講座試験トレーニング資料が信頼できるのは多くの受験生に証明されたものです。RadiatoripermotoriのCiscoの350-401資格取得講座試験トレーニング資料を利用したらきっと成功できますから、Radiatoripermotoriを選ばない理由はないです。 素晴らしい試験参考書です。

CCNP Enterprise 350-401 早速買いに行きましょう。

Radiatoripermotoriが提供した教材を勉強ツルとしてCiscoの350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)資格取得講座認定試験に合格するのはとても簡単です。 それは正確性が高くて、カバー率も広いです。あなたはRadiatoripermotoriの学習教材を購入した後、私たちは一年間で無料更新サービスを提供することができます。

Ciscoの350-401資格取得講座は専門知識と情報技術の検査として認証試験で、Radiatoripermotoriはあなたに一日早くCiscoの認証試験に合格させて、多くの人が大量の時間とエネルギーを費やしても無駄になりました。Radiatoripermotoriにその問題が心配でなく、わずか20時間と少ないお金をを使って楽に試験に合格することができます。Radiatoripermotoriは君に対して特別の訓練を提供しています。

Cisco 350-401資格取得講座 - Radiatoripermotoriを選択したら、成功をとりましょう。

社会と経済の発展につれて、多くの人はIT技術を勉強します。なぜならば、IT職員にとって、Ciscoの350-401資格取得講座資格証明書があるのは肝心な指標であると言えます。自分の能力を証明するために、350-401資格取得講座試験に合格するのは不可欠なことです。弊社の350-401資格取得講座真題を入手して、試験に合格する可能性が大きくなります。

350-401資格取得講座 勉強資料は公式Ciscoの350-401資格取得講座試験トレーニング授業 、Ciscoの350-401資格取得講座 自習ガイド、Ciscoの350-401資格取得講座 の試験と実践やCiscoの350-401資格取得講座オンラインテストなどに含まれています。Radiatoripermotori がデザインしたCiscoの350-401資格取得講座模擬トレーニングパッケージはあなたが楽に試験に合格することを助けます。

350-401 PDF DEMO:

QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

あなたにCisco　Microsoft DP-420J試験に関する最新かつ最完備の資料を勉強させ、試験に合格させることだと信じます。 Huawei H31-311_V3.0 - それに、あなたに美しい未来を作ることに助けを差し上げられます。 周りの多くの人は全部Cisco　Amazon SOA-C02-JPN資格認定試験にパースしまして、彼らはどのようにできましたか。 CyberArk IAM-DEF - 現在の時代で高効率は避けられない話題ですから、速いスピードと高効率が我々の目標です。 そうすれば、あなたは簡単にPECB ISO-IEC-42001-Lead-Auditor復習教材のデモを無料でダウンロードできます。

Updated: May 28, 2022